-- *****************************************************************
-- CISCO-BGP-POLICY-ACCOUNTING-MIB.my: Cisco BGP-Policy Accounting MIB
--
-- November 1999, Vinod B C
--
-- Copyright (c) 2000, 2002 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************CISCO-BGP-POLICY-ACCOUNTING-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,Integer32,Counter64FROM SNMPv2-SMI
MODULE-COMPLIANCE,OBJECT-GROUPFROM SNMPv2-CONF
ciscoMgmt
FROM CISCO-SMI
ifIndex
FROM IF-MIB;ciscoBgpPolAcctMIB MODULE-IDENTITYLAST-UPDATED"200207260000Z"ORGANIZATION"Cisco Systems, Inc."CONTACT-INFO" Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-snmp@cisco.com"DESCRIPTION"BGP policy based accounting information"REVISION"200207260000Z"DESCRIPTION"Added egress, packet and octet, counters for the BGP
policy accounting feature."REVISION"9912170000Z"DESCRIPTION"Initial version of this MIB module."::={ ciscoMgmt 148}ciscoBgpPolAcctMIBObjects OBJECTIDENTIFIER::={ ciscoBgpPolAcctMIB 1}cbpAcctTable OBJECT-TYPE
SYNTAXSEQUENCEOF CbpAcctEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The cbpAcctTable provides statistics about ingress and egress
traffic on an interface. This data could be used for purposes
like billing."::={ ciscoBgpPolAcctMIBObjects 1}cbpAcctEntry OBJECT-TYPESYNTAX CbpAcctEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each cbpAcctEntry provides statistics for traffic of interest
on an ingress and/or egress interfaces. The traffic of interest
may be used for purposes like billing, and is referred to from
here on in the MIB by the term 'traffic-type', which corresponds
to cbpAcctTrafficIndex. Traffic-types are configured by the user
on a per interface basis.
The statistics include ingress packet counts, ingress octet
counts, egress packet counts and egress octet counts. Entries
are created when traffic-type is configured on an interface.
Entries are deleted automatically when the user
removes the corresponding traffic-type configuration from an
interface."INDEX{ifIndex, cbpAcctTrafficIndex}
::={ cbpAcctTable 1}
CbpAcctEntry ::=SEQUENCE{
cbpAcctTrafficIndex Integer32,
cbpAcctInPacketCount Counter64,
cbpAcctInOctetCount Counter64,
cbpAcctOutPacketCount Counter64,
cbpAcctOutOctetCount Counter64}cbpAcctTrafficIndex OBJECT-TYPESYNTAXInteger32(1..2147483647)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"An integer value greater than 0, that uniquely identifies
a traffic-type. The traffic-type has no intrinsic meaning.
It just means the traffic coming into an interface can be
differentiated into different types. It is up to the user to
give meaning to and configure the various traffic-types on an
interface."::={ cbpAcctEntry 1}cbpAcctInPacketCount OBJECT-TYPE
SYNTAXCounter64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of packets received for a particular
traffic-type on an interface."::={ cbpAcctEntry 2}cbpAcctInOctetCount OBJECT-TYPESYNTAXCounter64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of octets received for a particular
traffic-type on an interface."::={ cbpAcctEntry 3}cbpAcctOutPacketCount OBJECT-TYPESYNTAXCounter64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of packets transmitted for a particular
traffic-type on an interface."::={ cbpAcctEntry 4}cbpAcctOutOctetCount OBJECT-TYPE
SYNTAXCounter64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of octets transmitted for a particular
traffic-type on an interface."::={ cbpAcctEntry 5}-- Conformance InformationciscoBgpPolAcctMIBConformance OBJECTIDENTIFIER::={ ciscoBgpPolAcctMIB 3}ciscoBgpPolAcctMIBCompliances OBJECTIDENTIFIER::={ ciscoBgpPolAcctMIBConformance 1}ciscoBgpPolAcctMIBGroups OBJECTIDENTIFIER::={ ciscoBgpPolAcctMIBConformance 2}-- Compliance StatementciscoBgpPolAcctMIBCompliance MODULE-COMPLIANCESTATUSdeprecated-- superceeded by-- ciscoBgpPolAcctMIBComplianceRev1DESCRIPTION"The compliance statement for entities which implement
this Cisco BGP-Policy Traffic Accounting MIB."MODULE-- this moduleMANDATORY-GROUPS{
cbpAcctTableGroup
}::={ ciscoBgpPolAcctMIBCompliances 1}ciscoBgpPolAcctMIBComplianceRev1 MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for entities which implement
this Cisco BGP-Policy Traffic Accounting MIB."MODULE-- this moduleMANDATORY-GROUPS{
cbpAcctTableGroupRev1
}::={ ciscoBgpPolAcctMIBCompliances 2}-- units of conformance:cbpAcctTableGroup OBJECT-GROUPOBJECTS{
cbpAcctTrafficIndex,
cbpAcctInPacketCount,
cbpAcctInOctetCount
}STATUSdeprecated-- superceeded by cbpAcctTableGroupRev1DESCRIPTION
"A collection of objects providing customer traffic
related parameters."::={ ciscoBgpPolAcctMIBGroups 1}cbpAcctTableGroupRev1 OBJECT-GROUPOBJECTS{
cbpAcctTrafficIndex,
cbpAcctInPacketCount,
cbpAcctInOctetCount,
cbpAcctOutPacketCount,
cbpAcctOutOctetCount
}STATUScurrentDESCRIPTION"A collection of objects providing customer traffic
related parameters."::={ ciscoBgpPolAcctMIBGroups 2}END